C613-50170-01 Rev B
Command Reference for x510 Series
2414
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
A
LLIED
T
ELESIS
M
ANAGEMENT
F
RAMEWORK
™ (AMF) C
OMMANDS
SHOW
DEBUGGING
ATMF
PACKET
show debugging atmf packet
Overview
This command shows details of AMF Packet debug command settings.
Syntax
show debugging atmf packet
Mode
User Exec and Global Configuration
Example
To display the AMF packet debugging status, use the command:
node_1#
show debug atmf packet
Figure 54-36: Sample output from the
show debugging atmf packet
command.
Related
Commands
Table 54-2:
ATMF packet debugging is on
=== ATMF Packet Debugging Parameters===
Node Name: x908
Port name: port1.1.1
Limit: 500 packets
Direction: TX
Info Level: Level 2
Packet Type Bitmap:
2. Crosslink Hello BPDU pkt with downlink domain info
3. Crosslink Hello BPDU pkt with uplink info
4. Down and up link Hello BPDU pkts
6. Stack hello unicast pkts
8. DBE request
9. DBE update
10. DBE bitmap update
