C613-50170-01 Rev B
Command Reference for x510 Series
2405
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
A
LLIED
T
ELESIS
M
ANAGEMENT
F
RAMEWORK
™ (AMF) C
OMMANDS
SHOW
ATMF
SECURE
-
MODE
STATISTICS
show atmf secure-mode statistics
Overview
Use this command to display AMF secure mode statistics. These statistics are from
when AMF secure mode was first enabled or the statistics were cleared with the
clear atmf secure-mode statistics
Syntax
show atmf secure-mode statistics
Mode
Privileged Exec
Example
To display AMF secure mode statistics on a master or member node, use the
command:
awplus#
show atmf secure-mode statistics
Output
Figure 54-33: Example output from
show atmf secure-mode statistics
on an
AMF master.
ATMF Secure Mode Statistics:
Certificates:
New ............. 7 Expired .......... 0
Updated ......... 7 Deleted .......... 0
Revoked ......... 1 Renewed .......... 2
Rejected ........ 1 Re-authorized .... 1
Authorized ...... 0
Local Certificates:
Valid ........... 4 Invalid ......... 0
Certificates Validation:
Request Valid ..................................... 2
Request Invalid ................................... 0
Common Valid ...................................... 13
Common Invalid .................................... 0
Issuer Valid ...................................... 14
Issuer Invalid .................................... 0
Signature Verified ................................ 29
Signature Invalid ................................. 0
Signature Purpose Invalid ......................... 0
Signatures Signed ................................. 12
Master Certificates:
Re-issued ......................................... 3
Downgraded to member .............................. 0
Public key change ................................. 2
Invalid SA public key ............................. 0
