C613-50170-01 Rev B
Command Reference for x510 Series
2367
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
A
LLIED
T
ELESIS
M
ANAGEMENT
F
RAMEWORK
™ (AMF) C
OMMANDS
SHOW
ATMF
GUESTS
show atmf guests
Overview
This command is available on any AMF master or controller in the network. It
displays a summary of the AMF guest nodes that exist in the AMF network,
including device type, parent node, and IP address.
Syntax
show atmf guests
Mode
User Exec/Privileged Exec
Usage
Use this command to display all guest nodes in a network. If you want to see only
the guests attached to a single node, use the
which shows information about the guest nodes and also about their link to their
parent node.
Example
To display the AMF guest output, use the command:
awplus#
show atmf guests
Output
Figure 54-17: Example output from the
show atmf guests
command
master#show atmf guests
Guest Information:
Device Device Parent Guest IP/IPv6
Name Type Node Port Address
---------------------------------------------------------------------
node1-2.0.1 x600-24Ts node1 2.0.1 192.168.2.10
wireless-zone1 AT-TQ4600 node2 1.0.1 192.168.1.10
wireless-zone2 AT-TQ4600 node2 1.0.2 192.168.1.12
Current ATMF guest node count 3
Table 60:
Parameters shown in the output of the
show atmf guests
command
Parameter
Description
Device Name
The name that is discovered from the device, or failing
that, a name that is auto-assigned by AMF. The
auto-assigned name consists of:
<parent node name>-<attached port number>
You can change this by configuring a description on the
port.
Device Type
The product name of the guest node, which is discovered
from the device. If no device type can be discovered, this
shows the name of the AMF guest-class that has been
assigned to the guest node by the
command.