C613-50170-01 Rev B
Command Reference for x510 Series
2316
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
A
LLIED
T
ELESIS
M
ANAGEMENT
F
RAMEWORK
™ (AMF) C
OMMANDS
CLEAR
ATMF
SECURE
-
MODE
CERTIFICATES
clear atmf secure-mode certificates
Overview
Use this command to remove all certificates from an AMF member or master. AMF
nodes will need to be re-authorized once this command has been run.
Syntax
clear atmf secure-mode certificates
Mode
Privileged Exec
Example
To clear all certificates from an AMF node, use the command:
awplus#
clear atmf secure-mode certificates
If this is the only master on the network you will see the following warning:
On an AMF member you will see the following message:
Related
Commands
show atmf secure-mode certificates
Command
changes
Version 5.4.7-0.3: command added
% Warning: This node is the only master in the network!
All the nodes will become isolated and refuse to join any ATMF
network. The certificates on all the isolated nodes must be
cleared before rejoining an ATMF network will be possible.
To clear certificates a reboot of the device is required.
Clear certificates and Reboot ? (y/n):
To clear certificates a reboot of the device is required.
Clear certificates and Reboot ? (y/n):
