Allied Telesis x510-28GPX, Command Reference Manual

Page: 2301 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 2301
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
A
LLIED
T
ELESIS
M
ANAGEMENT
F
RAMEWORK
™ (AMF) C
OMMANDS
ATMF SECURE
-
MODE CERTIFICATE EXPIRE
atmf secure-mode certificate expire
Overview Use this command on an AMF master to expire a secure mode certificate. Running
this command will force the removal of the AMF node from the network.
Syntax atmf secure-mode certificate expire < node-name > [area
< area-name >]
Mode Privileged Exec
Example To remove an AMF node named “node3” from an AMF network, use the following
command on the AMF master:
awplus# atmf secure-mode certificate expire node3
To remove an AMF node named “node2” in an area named “area2”, use the
following command on the AMF master:
awplus# atmf secure-mode certificate expire node2 area area2
Related
Commands
atmf secure-mode
show atmf secure-mode
show atmf secure-mode certificates
Command
changes
Version 5.4.7-0.3: command added
Parameter Description
<node-name>
Name of the AMF node you want to expire the certificate for.
area
Specify an AMF area.
<area-name>
Name of the AMF area you want to expire the AMF nodes
certificate for.