C613-50170-01 Rev B
Command Reference for x510 Series
2266
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
A
LLIED
T
ELESIS
M
ANAGEMENT
F
RAMEWORK
™ (AMF) C
OMMANDS
ATMF
LOG
-
VERBOSE
atmf log-verbose
Overview
This command limits the number of log messages displayed on the console or
permanently logged.
Use the
no
variant of this command to reset to the default.
Syntax
atmf log-verbose
<1-3>
no atmf log-verbose
Default
The default log display is 3.
Usage
This command is intended for use in large networks where verbose output can
make the console unusable for periods of time while nodes are joining and leaving.
Mode
Global Configuration
Example
To set the log-verbose to noise level 2, use the command:
node-1#
configure terminal
node-1(config)#
atmf log-verbose 2
Validation
Command
Parameter
Description
<1-3>
The verbose limitation (3 = noisiest, 1 = quietest)
