C613-50170-01 Rev B
Command Reference for x510 Series
2032
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
DHCP S
NOOPING
C
OMMANDS
SHOW
IP
DHCP
SNOOPING
INTERFACE
show ip dhcp snooping interface
Overview
Use this command to display information about DHCP snooping configuration and
leases for the specified ports, or all ports.
Syntax
show ip dhcp snooping interface [<
port-list
>]
Mode
User Exec and Privileged Exec
Example
To display DHCP snooping information for all ports, use the command:
awplus#
show ip dhcp snooping interface
Parameter
Description
<
port-list
>
The ports to display DHCP snooping configuration information
for. If no ports are specified, information for all ports is displayed.
Table 54:
Example output from the
show ip dhcp snooping interface
command
awplus#show ip dhcp snooping interface
DHCP Snooping Port Status and Configuration:
Port: Provisioned ports marked with brackets, e.g. (portx.y.z)
Action: LG = Log
TR = Trap
LD = Link down
Full Max
Port Status Leases Leases Action Subscriber-ID
--------------------------------------------------------------------------------
port1.0.1 Untrusted 1 1 LG -- --
port1.0.2 Untrusted 0 50 LG TR LD Building 1 Level 1
port1.0.3 Untrusted 0 50 LG -- --
port1.0.4 Untrusted 0 50 LG -- -- Building 1 Level 2
port1.0.5 Untrusted 0 50 LG -- LD Building 2 Level 1
port1.0.6 Untrusted 0 1 LG -- --
port1.0.7 Untrusted 0 1 LG -- --
port1.0.8 Untrusted 0 1 LG -- --
port1.0.9 Untrusted 0 1 -- TR --
port1.0.10 Untrusted 0 1 -- -- LD
port1.0.11 Trusted 0 1 -- -- --
port1.0.12 Trusted 0 1 -- -- --
