Allied Telesis x510-28GPX, Command Reference Manual

Page: 1989 / 2822

48
C613-50170-01 Rev B Command Reference for x510 Series 1989
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
DHCP Snooping
Commands
Introduction
Overview This chapter gives detailed information about the commands used to configure
DHCP snooping. For detailed descriptions of related ACL commands, see
IPv4
Hardware Access Control List (ACL) Commands . For more information about DHCP
snooping, see the DHCP Snooping Feature Overview and Configuration Guide .
DHCP snooping can operate on static link aggregators (e.g. sa2) and dynamic link
aggregators (e.g. po2), as well as on switch ports (e.g. port1.0.2).
Command List • “ arp security ” on page 1991
• “ arp security violation ” on page 1992
• “ clear arp security statistics ” on page 1994
• “ clear ip dhcp snooping binding ” on page 1995
• “ clear ip dhcp snooping statistics ” on page 1996
• “ debug arp security ” on page 1997
• “ debug ip dhcp snooping ” on page 1998
• “ ip dhcp snooping ” on page 1999
• “ ip dhcp snooping agent-option ” on page 2000
• “ ip dhcp snooping agent-option allow-untrusted ” on page 2001
• “ ip dhcp snooping agent-option circuit-id vlantriplet ” on page 2002
• “ ip dhcp snooping agent-option remote-id ” on page 2003
• “ ip dhcp snooping binding ” on page 2004
• “ ip dhcp snooping database ” on page 2005
• “ ip dhcp snooping delete-by-client ” on page 2006
• “ ip dhcp snooping delete-by-linkdown ” on page 2007
• “ ip dhcp snooping max-bindings ” on page 2008