C613-50170-01 Rev B
Command Reference for x510 Series
187
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
U
SER
A
CCESS
C
OMMANDS
SERVICE
PASSWORD
-
ENCRYPTION
service password-encryption
Overview
Use this command to enable password encryption. This is enabled by default.
When password encryption is enabled, the device displays passwords in the
running config in encrypted form instead of in plain text.
Use the
no service password-encryption
command to stop the device from
displaying newly-entered passwords in encrypted form. This does not change the
display of existing passwords.
NOTE
:
Do not use encrypted passwords for GUI users. The GUI requires unencrypted
user passwords only - not encrypted user passwords. Do not use option 8 for GUI users.
Syntax
service password-encryption
no service password-encryption
Mode
Global Configuration
Example
awplus#
configure terminal
awplus(config)#
service password-encryption
Validation
Commands
Related
Commands
