C613-50170-01 Rev B
Command Reference for x510 Series
1659
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Q
O
S C
OMMANDS
SHOW
MLS
QOS
INTERFACE
QUEUE
-
COUNTERS
show mls qos interface queue-counters
Overview
This command displays an interface’s egress queue counters. This can either be for
a specific queue or for all queues on the interface. If no queue is specified all queue
counters on the interface will be displayed.
The counters show the number of frames currently in the queue and the maximum
number of frames allowed in the queue, for individual egress queues and the port’s
queue (which will be a sum of all egress queues).
Syntax
show mls qos interface <
port>
queue-counters [queue <
number
>]
Mode
User Exec and Privileged Exec
Example
To show the counters for all queues on port1.0.1, use the command:
awplus#
show mls qos interface port1.0.1 queue-counters
Output
Figure 40-6:
Example output from the
show mls qos interface queue-counters
command
Parameter
Description
<
port
>
Switch port.
queue <
number
>
Queue number, from 0 to 7.
Interface port1.0.4 Queue Counters:
Port queue length 1169
Egress Queue length:
Queue 0 0
Queue 1 0
Queue 2 1169
Queue 3 0
Queue 4 0
Queue 5 0
Queue 6 0
Queue 7 0
Table 42:
Parameters in the output of the
show mls qos interface
queue-counters
command
Parameter
Description
Interface
Port we are showing the counters for.
