C613-50170-01 Rev B
Command Reference for x510 Series
1424
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
PIM-SM
V
6 C
OMMANDS
SHOW
IPV
6
PIM
SPARSE
-
MODE
NEIGHBOR
show ipv6 pim sparse-mode neighbor
Overview
Use this command to show the PIM-SMv6 neighbor information.
For information on filtering and saving command output, see the
“Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide
.
Syntax
show ipv6 pim sparse-mode neighbor [<
interface
>]
[
<IPv6-address>
] [detail]
Mode
User Exec and Privileged Exec
Examples
awplus#
show ipv6 pim sparse-mode neighbor
awplus#
show ipv6 pim sparse-mode neighbor vlan5 detail
Figure 34-9:
Example output from the
show ipv6 pim sparse-mode neighbor
command
Figure 34-10: Example output from the
show ipv6 pim sparse-mode neighbor
interface detail
command
Parameter
Description
<
interface
>
Interface name (e.g.
vlan2
). Show neighbors on an interface.
<
IPv6-address
>
Show neighbors with a particular address on an interface. The
IPv6 address entered in the form X:X::X:X.
detail
Show detailed information.
awplus#show ipv6 pim sparse-mode neighbor
Neighbor Address Interface Uptime/Expires DR
Pri/Mode
fe80::202:b3ff:fed4:69fe vlan2 05:33:52/00:01:41 1 /
fe80::20e:cff:fe01:facc vlan3 05:33:53/00:01:26 1 / DR
awplus#show ipv6 pim sparse-mode neighbor detail
Nbr fe80::211:11ff:fe44:4cd8 (vlan1), DR
Expires in 64 seconds, uptime 00:00:53
Holdtime: 70 secs, T-bit: off, Lan delay: 1, Override interval: 3
DR priority: 100, Gen ID: 1080091886,
Secondary addresses:
3ffe:10:10:10:3::180
