C613-50170-01 Rev B
Command Reference for x510 Series
1140
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
OSPF
V
3
FOR
IP
V
6 C
OMMANDS
SHOW
IPV
6
OSPF
DATABASE
EXTERNAL
show ipv6 ospf database external
Overview
Use this command in User Exec or Privileged Exec modes to display information
about the external LSAs.
For information on filtering and saving command output, see the
with AlliedWare Plus” Feature Overview and Configuration Guide
Syntax
show ipv6 ospf database external
<adv-router-id>
[self-originate|adv-router
<adv-router-id>
]
Mode
User Exec and Privileged Exec
Examples
To display information about the external LSAs, use the following command:
awplus#
show ipv6 ospf database external adv-router 10.10.10.1
Output
Figure 28-4:
Example output from the
show ipv6 ospf database external
command
Parameter
Description
<adv-router-id>
The Advertising Router ID
(usually entered in IPv4 address format A.B.C.D).
Note that this ID component no longer represents an address; it
is simply a character string that has an IPv4 address format.
self-originate
Self-originated link states.
adv-router
Displays all the LSAs of the specified router.
LS age: 1087
LS Type: AS-External-LSA
Link State ID: 0.0.0.13
Advertising Router: 0.0.1.1
LS Seq Number: 0x8000000C
Checksum: 0xCE9D
Length: 52
Metric Type: 2 (Larger than any link state path)
Metric: 20
Prefix: 2010:2222::/64
Prefix Options: 0 (-|-|-|-)
Forwarding Address: 2003:1111::1
...
