Allied Telesis x330-10GTX, Installation Manual

Page: 34 / 98

Chapter 1: Overview
34
Console Port
You use the Console port to manage the features and parameter settings
with the command line interface provided with the switch. This type of
management is referred to as local management. It is not conducted over
your network. To perform local management, you have to be at the
location of the switch and use the management cable included with the
device.
To establish a local management session with the switch, you have to
connect a terminal or a personal computer with a terminal emulation
program to the Console port, which has an RJ-45 style (8P8C) connector,
using the provided management cable. The cable has RJ-45 style (8P8C)
and DB-9 (D-sub 9-pin) connectors.
The Console port is set to the following specifications:
 Default baud rate: 115200 bps (Range is 9600 to 115200 bps)
 Data bits: 8
 Parity: None
 Stop bits: 1
 Flow control: None
Note
These settings are for a DEC VT100 or ANSI terminal, or an
equivalent terminal emulation program.