Allied Telesis TQ5403, Installation Manual, Page: 42 / 82

Chapter 2: Installing the Wireless Access Point
42
Overview to Installing the Access Point on a Wall or Ceiling
Here are the procedures for installing the wireless access point on a wall
or ceiling:
 “Pre-fitting the Mounting Bracket on the Access Point” on page 43
 “Installing the Mounting Bracket on a Wall or Ceiling” on page 46
 “Connecting Ethernet Cables to LAN1 and LAN2 Ports” on page 50
 “Connecting the AC/DC Power Adapter” on page 52
 “Attaching the Access Point to the Mounting Bracket” on page 53
 “Installing an Anti-theft Device” on page 55
Note
Please see “Reviewing Safety Precautions” on page 34 and
“Reviewing Installation Guidelines” on page 39 before installing the
product.
Note
Depending on the installation location, it may be easier to connect
the network cables and optional power adapter to the wireless
access point before installing it on the wall or ceiling.
You need the following items to install the wireless access point on a
ceiling or wall:
 TQ5403 or TQm5403 Access Point
 Two screws to attach the access point to the mounting bracket
 Mounting bracket
 Four (4) M4, 25.0 mm flat-head wood screws and anchors (not
provided) for fastening the mounting bracket

Phillips head screwdriver (not provided)

Pencil (not provided)

External AC/DC power supply (Optional if using PoE+. Required if not
using PoE+ or for redundant power.)
 Kensington lock (optional and not provided)
Note
The four Phillips head M4 screws/anchors, the Phillips head
screwdriver, pencil, external AC/DC power supply and Kensington
lock are
not included with the product.