Allied Telesis MMC10G Series, Installation Manual

Page: 19 / 66

MMC10G Series Mini Media Converter Installation Guide
19
Features
Here are the key features of the MMC10G Series Media Converters:

10G copper cabling up to 100m with CAT6A

MMC10GSP/SP supports two SFP+ ports

MMC10GT/SP supports one SFP+ port and one copper RJ45 port

MMC10GSP/SP can operate with any combination of supported
multi-mode modules, single-mode modules, or direct attach cables

MMC10GT/SP can convert between 10GBASE-T and any of the
supported multi-mode modules, single-mode modules, or direct
attach cables

Supports 100% traffic throughput and has no packet restrictions

Supports built-in loopback mode for installation verification and
troubleshooting

MMC10GT/SP supports packet generation mode for
troubleshooting

Facilitates quick fault detection, isolation and reporting with Smart
MissingLink™ (SML)

Includes a DIP switch for activating the SML feature

Includes a DIP switch for Loopback mode

Utilizes a 12 VDC external wall-mount AC power adapter

Displays LEDs for immediate visual status of each port

Provides a smaller sized space-saving alternative to connected
networks

Includes installation options such as desktop, media converter
chassis, or wall mount bracket

Provides low latency (~50ns)

Supports 1G to 1G or 10G to 10G modes

Auto-detects SFP+ speed

Complies with RoHS requirements

Complies with Trade Act Agreement (TAA) requirements

Applies Auto Negotiation and Auto MDI/MDI-X on the twisted-pair
port
Note
The SFP+ transceivers are sold separately. The maximum operating
distance of the MMC10G Series is dependent on the specific SFP+
module. For a list of supported transceivers, refer to the product’s
data sheet.