Allied Telesis IX5-28GPX Command Reference Manual Download Page 294

Page: 294 / 2231

C613-50152-01 Rev C

Command Reference for IX5-28GPX

294

AlliedWare Plus™ Operating System - Version 5.4.7-0.x

OGGING

OMMANDS

CLEAR

LOG

BUFFERED

clear log buffered

Overview

This command removes the contents of the buffered log.

NOTE

When this command is used within a stacked environment, it will remove the

contents of the buffered logs in all stack members.

Syntax

clear log buffered

Mode

Privileged Exec

Example

To delete the contents of the buffered log use the following commands:

awplus#

clear log buffered

Related

Commands

default log buffered

log buffered

log buffered (filter)

Summary of Contents for IX5-28GPX
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IX5-28GPX

Reviews:

Allied Telesis IX5-28GPX, Command Reference Manual, Page: 294 / 2231

Search results

Summary of Contents for IX5-28GPX

Reviews: