manualshive.com logo in svg

Allied Telesis IS230-10GP, Web User Manual

Share
Download
Allied Telesis IS230-10GP Web User Manual Download Page 33

Chapter 2: Managing Switch

34

The 

Logging Information 

settings in the ensuing table are informational 

only: Target, Severity and Category.
The 

Logging Message

 settings in the ensuing table are informational 

only: No., Time Stamp, Category, Severity and Message.

Port Monitoring

Port Network Monitor is a bandwidth and network monitoring tool for the 
purpose of capturing network traffic and measuring of network throughput. 
The monitoring functionality includes listing of port statistics as well as port 
utilization.

Port Statistics

To access this page, click 

Monitoring

 > 

Port Monitoring

 > 

Port 

Statistics

.

Figure 6. Monitoring > Port Monitoring > Port Statistics

Severity

The setting allows you to designate a severity level for the Logging 
Message Filter function.
Click the drop-down menu to select the severity level target setting.
The level options are:
n

emerg: Indicates system is unusable. It is the highest level of 
severity.

n

alert: Indicates action must be taken immediately.

n

crit: Indicates critical conditions.

n

error: Indicates error conditions.

n

warning: Indicates warning conditions.

n

notice: Indicates normal but significant conditions.

n

info: Indicates informational messages.

n

debug: Indicates debug-level messages.

Category

Click the drop-down menu to select the category level target setting.

View

Click 

View

 to display all Logging Information and Logging Message 

information.

Refresh

Click 

Refresh

 to update the screen.

Clear buffered mes-
sages

Click 

Clear buffered messages

 to clear the logging buffer history list. 

Table 2. Logging Message (Continued)

Item

Description

Summary of Contents for IS230-10GP









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands