Allied Telesis IE340 Series, Installation Manual, Page: 111 / 136

Chapter 5: Powering On the Switch
111
Figure 53. Initialization Messages (Continued)
Starting base/crond... [ OK ]
starting base/appmond... [ OK ]
Starting base/clockcheck... [ OK ]
Starting network/execd... [ OK ]
Starting base/inet... [ OK ]
Received event apteryx.done
Starting hardware/early_host_info...
[ OK ]
Starting base/alfred... [ OK ]
Starting network/kermond... [ OK ]
Starting network/fips (apteryx.done)... [ OK ]
Starting base/logconf... [ OK ]
Starting hardware/platformd.... [ OK ]
Starting hardware/plugman.... [ OK ]
Starting hardware/timeout.... [ OK ]
Starting hardware/hardware-done.... [ OK ]
Received event board.inserted
Received event hardware.done
Starting network/poefw...
[ OK ]
Starting base/external-media... [ OK ]
Received event poefw.done
Starting network/hostcfg...
[ OK ]
Received event hostcfg.done
Starting network/cmlplatformd...
[ OK ]
Starting base/eventwatch... [ OK ]
Starting network/startup... [ OK ]
Starting hardware/platform_eventd.... [ OK ]
Starting network/licd... [ OK ]
Starting network/tempmond... [ OK ]
Received event network.enabled
Initializing HA processes:
almond, atmf_agentd, execd, hostd, sflowd, vrrpd, mstp
ripngd, rmon, atmfd, espr, hsl, irdpd, lldpd
loopprot, ospf6d, auth, pim6d, ripd, nsm, pdmd
lacp, onm, udldd18:00:59, awplus Platform: SENSOR Board Base - Voltage:
Input 1: Alarm asserted. Reading:0.000 Threshold:46.000 (Volts)
, pimd, bgpd, ospfd18:00:59 awpplus Platfor: SENSOR Board Base - Almmmon:
Relay Output 1: Alarm cleared. Closed.
, imi
Received event network. initialized
Assigning Active Workload to HA processes:
hsl, nsm, sflowd, irdpd, lacpd, loopprotd, ospfd
ripd, ripngd, rmond, vrrpd, bgpd, epsfr, mstpd
onmd, ospf6d, pdmd, pim6d, pimd, authd, lldpd
imi