Allied Telesis GS950 PS Series, Installation Manual, Page: 63 / 108

GS950 PS V2 Series of Gigabit Ethernet PoE+ Switches Installation Guide
63
Tools and Material
Here are the required tools and material for installing the switch on a
wooden wall with the standard brackets that come with the device:
 Two standard brackets
 Eight screws to secure the brackets to the switch (included with the
switch)

Four wood or concrete wall screws (included with the switch)

Four concrete wall anchors (included with the switch)

Cross-head screwdriver (not provided)

Stud finder for a wooden wall, capable of identifying the middle of
wall studs and hot electrical wiring (not provided)
 Drill and 1/4” carbide drill bit for a concrete wall (not provided)
 Plywood base if you are installing the switch on a wall with wooden
studs (not provided.) Refer to “Plywood Base for a Wall with
Wooden Studs” on page 61 for illustrations.
 Four screws and anchors for attaching the plywood base to the
wall (not provided)
Caution
The supplied screws and anchors may not be appropriate for all wall
material. A qualified building contractor should determine the
appropriate hardware requirements for your wall before installing the
switch.

E88