Allied Telesis DNC10 Series, Installation And User Manual

Page: 47 / 118

DNC10 Series Network Interface Cards Installation and User’s Guide
47
Installing the Driver Software
Once you physically install the DNC10 Series network card, the system
detects the new hardware and creates an entry in the Device Manager
when the Windows operating system first boots up. Shortly after you log in,
you need to install the driver software for your adapter card.
Note
To install the driver software, you must have administrative
privileges.
To install the driver software, do the following:
1. Access the Device Manager, see “Accessing the Device Manager” on
page 45.
2. In the Device Manager window, double-click Network Adapters to
expand the field.
3. Option 1 - If the system has another network connection to provide
Internet access:
a. Right-click on Aquantia device or Ethernet Controller (if no
driver was installed).
b. Select Update Driver Software .
The Update Driver Software window appears. See Figure 20 as an
example.