Allied Telesis CentreCOM GS970EMX Series, Installation Manual

Page: 21 / 126

CentreCOM GS970EMX Series Installation Guide for Standalone Switches
21
Note
The ports support full-duplex mode only.
Note
SFP and SFP+ transceivers are sold separately. Refer to the
product’s data sheet on the Allied Telesis website for a list of
supported transceivers.
Note
The switches do not support the 7-meter SP10TW7 direct connect
twinax cable.
Port and System
LEDs
Here are the port and system LEDs:

Speed/activity and duplex mode LEDs for the 10/100/1000Mbps
copper ports

Speed/activity LEDs for the 1/2.5/5/10Gbps Multi-Gigabit copper
ports

Speed/activity LEDs for the SFP+ ports

Switch ID number LED
Note
Refer to “Port LEDs” on page 28.
Installation
Options
Here are the installation options for the switches:

Desk or tabletop

Standard 19-inch equipment rack

Wood or concrete wall
Caution
The GS970EMX Switches are fanless. Before installing a switch,
you should verify that the temperature and ventilation at the
installation site are suitable for the device. The operating
temperature range of the switches is provided in “Environmental
Specifications” on page 121.
MAC Address
Table
Here are the basic features of the MAC address tables in the switches:

Storage capacity of 16,384 dynamic entries

Storage capacity of 256 static entries