Allied Telesis AT-TQ6602, Installation Manual, Page: 35 / 108

TQ6602 Wireless Access Point Installation Guide
35
Management Tools
The wireless access point supports the following management tools.
Web Browser
The wireless access point has a web browser management interface for
configuring the device from your management workstation. The web
browser interface allows you to manage one unit at a time and supports
both non-secure HTTP and secure HTTPS management sessions. The
default is HTTP. The product has been tested with Microsoft Internet
Explorer version 11 or later, Microsoft Edge, and Chrome.
Vista Manager
EX and AWC
Plug-in
The wireless access point supports Vista Manager and the Autonomous
Wave Control (AWC) plug-in. Configuring and monitoring large numbers of
devices is simplified with AWC because you can add multiple devices to
management groups and manage them as one unit. The application can
also monitor the operations of the wireless access points and
automatically adjust operating properties to optimize the performance of
your wireless network.
Note
The Channel Blanket feature in the TQ6602 Access Point requires
Vista Manager EX and the AWC plug-in.
Note
The TQ6602 Wireless Access Point requires Vista Manager EX and
AWC plug-in version 2.5.1 or later.
SNMP
You can use SNMPv1 or v2c to view the parameter settings of the devices.
The MIB is available from the Allied Telesis web site. For instructions on
how to configure the unit for SNMP, refer to the TQ6602 Wireless Access
Point Management Software User Guide .