Allied Telesis AT-MCF2000, Installation Manual

Page: 65 / 190

AT-MCF2000 Media Converter Series Installation Guide
Section I: Features 65
SD Slot
The SD slot is for a secure digital memory card, which is used in the
following situations:
❒
Storing backup copies of the master configuration file on the
management module - You can maintain a library of past configuration
files of a chassis or stack so that you can return a unit to a previous
configuration.
❒
Transferring master configuration files between chassis - You can
configure units that are to have similar configurations by transferring
the master configuration file with a secure digital memory card.
A secure digital memory card is optional. The management module can
operate without a memory card.
For information on using a secure digital memory card with the
management module, refer to the
AT-S85 and AT-S97 Management
Software Command Line Interface User’s Guide .
Note
The management module supports 128 MB, 256 MB, and 512 MB
secure digital memory cards from Allied Telesis. For ordering
information, contact your Allied Telesis sales representative or visit
our web site.
Note
Do not remove a secure digital memory card from the management
module when the slot’s L/A LED is amber. Wait for the LED to
change to green before removing the card.