Allied Telesis AT-IE510-28GSX-80, Installation Manual, Page: 71 / 126

AT-IE510 Series Installation Guide
71
Monitoring the Switch Initialization Process
It takes about thirty seconds to initialize the management software. To
monitor the initialization process, do one of the following:

Watch the switch ID LED. It displays the number “8” for about the
first 15 seconds and then the number “1.”

Connect a terminal, or a computer that has a terminal emulator
program, to the Console port on the switch. The bootup sequence
is complete when the “awplus login” prompt appears.
After the switch is initialized, do one of the following:

If you are installing a VCStack, go to Chapter 8, “Verifying the
Status of VCStack” on page 89.

If you are installing a stand-alone switch, go to Chapter 7,
“Configuring the Switch for Stand-alone Operations” on page 79.