Allied Telesis AT-ANC10S Installation And User Manual Download Page 25

Page: 25 / 124

AT-ANC10S/2 Adapter Installation and User’s Guide

Reviewing Safety Precautions

Please review the following safety precautions before you begin to install a
network adapter card.

Note

The



indicates that a translation of the safety statement is

available in a PDF document titled “Translated Safety Statements”
on the Allied Telesis website at

www.alliedtelesis.com/support/

software

. After you have accessed this website, enter the model

number in the

Search by Product Name

box and then click

Find

view the current list of documents.

Warning

This is a Class 1 Laser product.



Warning

The fiber optic ports contain a Class 1 Laser device. When the ports
are disconnected, always cover them with the provided plug.
Exposed ports may cause skin or eye damage.



Warning

Do not stare into the laser beam.



Warning

Do not look directly at the fiber optic cable ends or inspect the cable
ends with an optical lens.



Warning

Do not work on this equipment or cables during periods of lightning
activity.



Note

All Countries: Install this product in accordance with local and
National Electric Codes.



Summary of Contents for AT-ANC10S





























































































































Search results

Summary of Contents for AT-ANC10S

Reviews:

Related manuals for AT-ANC10S

Brands by name

Popular brands

Allied Telesis AT-ANC10S, Installation And User Manual

Search results

Summary of Contents for AT-ANC10S

Reviews:

Related manuals for AT-ANC10S

Brands by name

Popular brands