Allied Telesis AT-8100L/8POE, User Manual

Page: 258 / 330

Chapter 22: Quality of Service (QoS)
258
Figure 108. Text Box for CoS
Note
The action options of Deny, Permit, and Mirror are for the Access
Control List (ACL) feature. For information about creating an ACL,
see “Creating an ACL” on page 235.
Match
The following parameters are under the “Match” heading on the Traffic
Classification Page.
Note
You can specify one or more match criteria to create a QoS policy.

Source Address — Specify a source address to match ingress
packets as needed. Enter one of the following:
The keyword “any” : Matches all packets on the source
address.
IPv4 Address and mask : Enter an IPv4 source address
followed by a slash (/) and a mask if you are creating an IPv4
ACL.
MAC Address and mask : Enter a MAC source address
followed by a slash (/) and a mask if you are creating a MAC
ACL. The wildcard mask for MAC addresses must be either “0”
(zero) or “F” to indicate the parts of MAC address to filter. “F”
means anything; “0” (zero) means it has to match.

Destination Address — Specify a destination address to match
ingress packets as needed. Enter one of the following:
The keyword “any” : Matches all packets on the destination
address.
IPv4 Address and mask : Enter an IPv4 source address
followed by a slash (/) and a mask if you are creating an IPv4
ACL.