Allied Telesis AT-8100L/8POE, User Manual, Page: 126 / 330

Chapter 10: Setting Static Port Trunks
126
Figure 49. Add Static Trunk Page
5. Assign an ID number of a new static trunk in the Trunk ID field. The
range is 1 to 32.
6. Select the Load Balance Method . You can assign different load
distribution methods to different static trunks on the same switch.
Choose from the following:

Src MAC — Source MAC address.

Dst MAC — Destination MAC address.

Src-Dst MAC — Source address and destination MAC address.

Src IP — Source IP address.

Dst IP — Destination IP address.

Src-Dst IP — Source address and destination IP address.
7. Select a member port in the Device ID table by clicking a box that
indicates a port number. You can select multiple ports. A green check
mark indicates a port has been selected.
To deselect a port, click the box that indicates the port number.
8. Click Add .
A confirmation message is displayed.
9. Click SAVE to save your changes to the startup configuration file.