Allied Telesis AT-220-28GS Series, Installation Manual

Page: 49 / 58

AT-x220-28GS Switch Installation Guide
39
Cabling the Network Ports
Observe the following guidelines before installing SFP transceivers on the
switch.

The transceivers are hot-swappable. You can install them while the
switch is powered on.

For a list of supported transceivers, refer to the product data sheet
on the Allied Telesis web site.

The operational specifications and fiber optic cable requirements of
the transceivers are provided in the documents included with the
devices.

You should install a transceiver before connecting its fiber optic
cable.

Unnecessary removal and insertion of a transceiver can lead to
premature failure.
Caution
Transceivers can be damaged by static electricity. Be sure to
observe all standard electrostatic discharge (ESD) precautions, such
as wearing an anti-static wrist strap, to avoid damaging the devices.
 E92