C613-50186-01 Rev B
Command Reference for AR2050V
1795
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
T
RAFFIC
C
ONTROL
C
OMMANDS
SHOW
TRAFFIC
-
CONTROL
RULE
CONFIG
-
CHECK
show traffic-control rule config-check
Overview
Use this command to show information about traffic control rule validity.
Syntax
show traffic-control rule config-check
Default
None
Mode
Privileged Exec
Usage
An asterisk is printed before each rule that is invalid. To help determine why the
rule is invalid, the show traffic-control rule config-check command will print the
reasons why the rule is invalid. Information is only shown for invalid rules. If all rules
are valid, a message will be printed showing all rules are valid.
Example
To check if configured rules are valid, use the commands:
awplus#
show traffic-control rule config-check
Output
Figure 38-8:
Example output from
show traffic-control rule config-check
Related
Commands
show running-config traffic-control
awplus#show traffic-control rule config-check
Rule 30:
"From" entity does not exist
"To" entity does not exist
Policy doesn’t exist or is not leaf