manualshive.com logo in svg

Allied Telesis AR100 series, User Manual, Page: 15 / 128

Share
Download
Allied Telesis AR100 series User Manual Download Page 15

Getting Connected

3-15

Figure 3-2: Install Software CD screen 

3.

Install the support files for the AR100 Series Access Wizard on your PC by 
clicking on 

AR100 Series Access Wizard

 and following the on screen 

intructions. 

4.

If you do not have Adobe Acrobat Reader installed on your PC, install it 
now by clicking 

Acrobat Reader

 and following the on screen instructions. 

You will use this to view the User Guide or the Reference Manual.

5.

If you do not already have a web browser installed on your PC, install one 
now by clicking on either Internet Explorer or Netscape Communicator and 
following the on-screen instructions. You will use the web browser to 
configure the router with information specific to your connections.

6.

Click 

Main Menu

 to return to the CD-ROM Main Menu.

Getting your PC communicating with the 
router

The AR100 Series Access Wizard will automatically set up communication 
between your PC and your router. It checks that your PC has an Ethernet 
adapter card, that TCP/IP is installed and correctly configured, and that a web 
browser installed. It checks that there is a connection between the router and 
the PC, and makes sure that  the router and the PC have the IP addresses they 
need to communicate with one another.

If anything in the system setup prevents communication, dialog boxes will tell 
you what to do. For more information, see 

Chapter 9, Troubleshooting

. If you 

need to restart the AR100 Series Access Wizard after an interruption, remove 
the CD, re-insert it in the CD-ROM drive, and click 

Configure Router

 again.

1.

Start the AR100 Series Access Wizard by clicking 

Configure Router

 

on the 

CD’s Welcome screen. The “AR100 Series Access Wizard Welcome dialog” 
on page 16 opens.

Summary of Contents for AR100 series

































































































































Reviews:

No comments