28
Patch Release Note
Patch 86241-05 for Software Release 2.4.1
C613-10340-00 REV E
■
ENABLE DS3 TEST
■
RESET DS3
■
RESET DS3 COUNTERS
■
SET DS3
■
SHOW DS3 CMTCE
■
SHOW DS3 CONFIGURATION
■
SHOW DS3 COUNTERS
■
SHOW DS3 DEBUG
■
SHOW DS3 STATE
■
SHOW DS3 TEST
Once the interface is set up and configured, it can be used in conjunction with
Frame Relay, using the following commands:
■
CREATE FRAMERELAY
■
SHOW FRAMERELAY
See Chapter 5, Frame Relay in your switch’s Software Reference.
DS3 interfaces can be tested with the test facility, using the following
commands:
■
DISABLE TEST INTERFACE
■
ENABLE TEST INTERFACE
■
SHOW TEST
See Chapter 7, Test Facility in your switch’s Software Reference.