Patch 86241-06 For Rapier Switches
11
Patch 86241-05 for Software Release 2.4.1
C613-10340-00 REV E
Some change actions, and the resending of prune messages were not
operating correctly. This issue has been resolved.
The ADD FIREWALL POLICY and SET FIREWALL POLICY commands
did not generate a valid port list when the optional PORT parameter was set
to ALL. This issue has been resolved.
When OSPF was enabled on startup, an OSPF interface would sometimes
stay in the DOWN state. This issue has been resolved.
Features in 86241-03
Patch file details are listed in Table 2.
Patch 86241-03 includes all issues resolved and enhancements released in
previous patches for Software Release 2.4.1, and the following enhancements:
Incorrect ICMP checksums on incoming packets were not being recognised,
and packets with an odd byte size were erroneously being processed. These
issues have been resolved.
MLD snooping is now supported on AT-9800 Series Switches and Rapier i
Series Switches.
The ENABLE IPV6 MTUDISCOVERY and SET IPV6 MTU INTERFACE
commands were not displayed in the SHOW CONFIGURATION
DYNAMIC command. This issue has been resolved.
Link-local address behaviour was incorrect. Also, the PUBLISH parameter
was not updated by the SET IPV6 INTERFACE command, or displayed in
the SHOW IPV6 INTERFACE command. These issues have been resolved.
The board descriptions have changed for some instances of AT-9800 Series
Switches.
PCR: 02574
Module: DVMRP
Network affecting: No
PCR: 02579
Module: FIREWALL
Network affecting: No
PCR: 02587
Module: OSPF
Network affecting: No
Table 4: Patch file details for Patch 86241-03.
Base Software Release File
86s-241.rez
Patch Release Date
26-Nov-2002
Compressed Patch File Name
86241-03.paz
Compressed Patch File Size
379165 bytes
PCR: 02314
Module: IPG
Network affecting: No
PCR: 02414
Module: IPv6, SWI, IPG, VLAN
Network affecting: No
PCR: 02426
Module: IPv6
Network affecting: No
PCR: 02428
Module: IPv6
Network affecting: No
PCR: 02467
Module: CORE
Network affecting: No