Allied Telesis 86222-21 Release Note Download Page 5

Patch 86222-21 For Rapier Switches and AR800 Series Modular Switching Routers

5

Patch 86222-21 for Software Release 2.2.2
C613-10319-00 REV T

Lost OFFER messages on the server are now handled correctly.

The DHCP server now correctly handles DHCP clients being moved to 
a different interface on the DHCP server after they’ve been allocated an 
IP address.

Responses to DNS requests received by a DNS relay agent, and forwarded 
to the DNS server, were returned to the requester with a source IP address 
of the DNS server rather than the DNS relay agent. This issue has been 
resolved.

Log messages are no longer stored in NVS.

A buffer leak occurred when a large number of flows (over 4000) were in use 
and needed to be recycled. This issue has been resolved.

When the only feature licence in the feature licence file was disabled, the 
licence file stored on FLASH memory did not change. This was due to a 
previous enhancement in PCR 02184 which prevented existing files being 
deleted before a new version was stored. This issue has been resolved.

The EPORT parameter in the ADD SWITCH L3FILTER ENTRY and SET 
SWITCH L3FILTER ENTRY commands was matching multicast and 
broadcast packets with software filtering. This issue has been resolved.

Some switch chip register values have been changed to improve QoS 
support on Rapier G6 and Rapier G6f switches.

The PURGE IP command now resets the IP route cache counters to zero.

On a Rapier 24, adding an IP interface over a FR interface caused an 
ASSERT debug fatal error. This issue has been resolved.

The ARL entry for the virtual router MAC was incorrectly showing a 
numerical value. The entry now shows the CPU’s port value.

Sometimes the Firewall erroneously used NAT. This issue has been 
resolved.

A dual Ethernet router was incorrectly accepting an IP address from a 
DHCP server when the offered address was on the same network as the 
other Ethernet interface. An error is now recorded when DHCP offers an 
address that is in the same subnet as another interface.

PCR: 02203

Module: IPG

Network affecting: No

PCR: 02208

Module: LOG

Network affecting: No

PCR: 02214

Module: IPG

Network affecting: No

PCR: 02215

Module: FILE

Network affecting: No

PCR: 02220

Module: SWI

Network affecting: No

PCR: 02224

Module: SWI

Network affecting: No

PCR: 02229

Module: IPG

Network affecting: No

PCR: 02242

Module: IPG

Network affecting: No

PCR: 02246

Module: VRRP

Network affecting: No

PCR: 02250

Module: FIREWALL

Network affecting: No

PCR: 02259

Module: DHCP, IPG

Network affecting: No

Summary of Contents for 86222-21





























Reviews: