manualshive.com logo in svg

Allied Telesis 2911 Series, User Manual

Share
Download
Allied Telesis 2911 Series User Manual Download Page 32

Chapter 2: Installing the Hardware

32

Pre-Installation Checklist

Before installing the AT-2911 series adapter, check the following list:

1. Check that your computer has an appropriate open PCIe slot.

2. Verify that your computer is using the latest BIOS.

3. When you download the driver software from the Allied Telesis 

website, record the path to where the driver file resides on your 
system.

4. If your computer is active, shut it down. 

5. When the system shutdown is complete, power off and unplug your 

system.

6. Holding the adapter by the edges, remove it from its shipping package 

and place it on an antistatic surface.

7. Check the adapter for visible signs of damage, particularly on the edge 

connector. 

Note

Do not attempt to install a damaged adapter. If the adapter is 
damaged, report it to Allied Telesis. See “Contacting Allied Telesis” 
on page 15.

Summary of Contents for 2911 Series



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands