manualshive.com logo in svg

Allice Messtechnik R&S ZND, User Manual, Page: 900 / 1252

Share
Download
Allice Messtechnik R&S ZND User Manual Download Page 900

Command reference

R&S

®

ZND

900

User Manual 1173.9557.02 ─ 61

MMEMory:STORe:RIPPle 

<TraceName>, <RippleLimFile>

Saves the ripple limits associated with a specified trace to a ripple limit file. Ripple limit
definitions are created using the 

CALCulate<Chn>:RIPPle...

 commands.

Setting parameters: 

<TraceName>

Name of an existing trace in the active setup (string parameter)
for which a ripple limit definition exists.

<RippleLimFile>

String parameter to specify the name and directory of the cre-
ated ripple limit file. The default extension (manual control) for
ripple limit files is 

*.ripple

, although other extensions are

allowed.
If no path is specified the analyzer searches the current direc-
tory, to be queried with 

MMEMory:CDIRectory

Example: 

See 

MMEMory:LOAD:LIMit

Usage: 

Setting only

Manual operation: 

See 

"Recall Ripple Test.../Save Ripple Test..."

 

on page 329

MMEMory:STORe:SEGMent 

<Channel>, <SweepSegFile>

Saves the sweep segment definition of the related channel to a an ASCII file. Sweep
segments are defined using 

[SENSe:]SEGMent...

 commands.

Setting parameters: 

<Channel>

Channel number

<SweepSegFile>

String parameter to specify the name and directory of the cre-
ated sweep segment file. The default extension (manual control)
for sweep segment files is 

*.SegList

, although other exten-

sions are allowed.
If no path is specified the analyzer searches the current direc-
tory, to be queried with 

MMEMory:CDIRectory

Example: 

See 

MMEMory:LOAD:SEGMent

Usage: 

Setting only

Manual operation: 

See 

"Import.../ Export..."

 

on page 375

MMEMory:STORe:STATe 

<Compatibility>, <RecallSetFile>

Stores the configuration data of the current recall set to the specified recall set file.

MMEMory:STORe:STATe

 also renames the current recall set. See example for

MMEMory:LOAD:STATe

.

Setting parameters: 

<Compatibility>

1 (this value is used for compatibility with the SCPI standard but
ignored).

SCPI command reference

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S ZND





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments