Command reference
R&S
®
ZND
840
User Manual 1173.9557.02 ─ 61
Example:
DISPlay:LAYout GRID
Select te split type where the diagrams are arranged in rows and
columns.
DISPlay:LAYout:GRID 2,2
Arrange 4 diagrams in two rows and two columns.
Manual operation:
DISPlay:LAYout:JOIN
<MainLayoutId>, <DiagramNumber>, <SubLayoutId>
Creates a nested layout, inserting a sub-layout into one of the diagrams of a main lay-
out. Main layout and sub-layout must be defined previously, preferably using
Note:
The maximum number of joined levels within a layout is 16.
Setting parameters:
<MainLayoutId>
Integer value 1, 2 ...
Current number of main layout, as defined by
.
<DiagramNumber>
Integer value 1, 2 ...
Diagram number in the main layout
<SubLayoutId>
Integer value 1, 2 ...
Current number of sub-layout, as defined by
.
*RST:
n/a
Example:
Usage:
Setting only
Manual operation:
"Additional Functionality: SCPI Commands"
DISPlay:LAYout:OVERlay
Displays all traces of the active recall set in a single diagram, which is maximized to
occupy the whole screen.
Usage:
Event
Manual operation:
DISPlay:LAYout:SPLit
Creates a separate diagram for each trace in the active recall set and automatically
arranges those diagrams in the diagram area. Existing diagrams are deleted.
Usage:
Event
Manual operation:
SCPI command reference
www.allice.de
Allice Messtechnik GmbH