Allice Messtechnik R&S ZND, User Manual, Page: 524 / 1252

GUI reference
R&S
®
ZND
524 User Manual 1173.9557.02 ─ 61
This CSV type file contains one line (terminated by CR+LF) per fault. With ";" as "Field
Separator" and "." as "Decimal Separator", the fault list of
Figure 5-34 is exported to
1; Trc1; 457.2 mm; -8.56 dB
2; Trc1; 1.539 m; -9.24 dB
For an explanation of the possible filters, see "Contents" on page 523).
Tracking Enabled
If checked (default), the "Fault Table" on page 523 is cleared at every sweep start and
populated in real time. Uncheck "Tracking Enabled" to freeze the table contents.
5.16 Display softtool
The "Display" softtool provides all display settings and the functions for activating,
modifying and arranging different diagrams.
Access: SYSTEM – [DISPLAY]
Related information
Refer to the following sections:
●
Chapter 4.1.3, "Traces, channels and diagrams" , on page 75
●
Chapter 4.2.1, "Display elements of a diagram" , on page 86
●
Chapter 3.3.4, "Handling diagrams, traces, and markers" , on page 52
5.16.1 Diagram tab
Selects a diagram as the active diagram, defines a title, deletes or adds diagrams and
arranges them on the screen. Many of the functions are unavailable if the active recall
set contains only one diagram.
Related settings
Use the icons in the toolbar to add diagrams and traces. Use the "Zoom Active Trc"
icon to zoom into a rectangular portion inside a diagram. See also
Chapter 3.3.4, "Han-
dling diagrams, traces, and markers" , on page 52 and Chapter 3.3.6.1, "Using the
graphical zoom" , on page 59.
Display softtool
www.allice.de Allice Messtechnik GmbH