manualshive.com logo in svg

Allice Messtechnik R&S ZND, User Manual, Page: 291 / 1252

Share
Download
Allice Messtechnik R&S ZND User Manual Download Page 291

GUI reference

R&S

®

ZND

291

User Manual 1173.9557.02 ─ 61

Remote command: 

CALCulate<Chn>:MATH:WUNit[:STATe]

Recall... / Save...

Recalls / saves a mathematical expression from / to a trace math string file. Trace math
string files are ASCII files with the default extension 

*.mth

 and contain the mathemati-

cal expression as it is written in the "User Def Math" dialog. It is possible to change or
create math string files using a text editor.

Remote command: 

CALCulate<Chn>:MATH:WUNit[:STATe]

5.5.5

 

Time Domain tab

The "Time Domain" tab enables and configures the time domain representation of the
measurement results.

Time domain analysis requires option R&S

 

ZND-K2. If this option is not installed, the

"Time Domain" and 

Time Gate tab

 tabs are hidden.

Background information

Refer to 

Chapter 4.7.5, "Time domain analysis"

, 

on page 202.

For a comparison of the different transformation types and windows, and for applica-
tion examples, please also refer to the application note 1EZ44_OE (

https://www.rohde-

schwarz.com/appnote/1EZ44

).

5.5.5.1

 

Controls on the Time Domain tab

The contents of the "Time Domain" tab are also displayed on the "Meas" softtool for
non-frequency converting DUTs.

Trace Config softtool

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S ZND





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments