Allice Messtechnik R&S ZND, User Manual, Page: 1142 / 1252

Command reference
R&S
®
ZND
1142 User Manual 1173.9557.02 ─ 61
Query parameters:
<Response> CH1Data | CH2Data | CH3Data | CH4Data | CH1Mem |
CH2Mem | CH3Mem | CH4Mem | MDATa1 | MDATa2 | MDATa3 |
MDATa4 | MDATa5 | MDATa6 | MDATa7 | MDATa8
Response data of the selected trace, see
Table 7-16 .
The data is transferred in the data format defined via
FORMat[:
DATA]
and
FORMat:DEXPort:SOURce
. The unit is the default
unit of the measured parameter; see
CALCulate<Ch>:
PARameter:SDEFine
.
Example: SWE:POIN 20
Create a trace with 20 sweep points, making the created trace
the active trace of channel 1 (omitted optional mnemonic
SENSe1
).
CALC:FORM MLIN; :FORM ASCII; FORM:DEXP:SOUR
FDAT
Select the trace data format: linear magnitude values, ASCII for-
mat and formatted trace data (1 value per sweep point).
TRAC? CH1DATA
Query the 20 response values of the created trace according to
the previous format settings.
Usage: Query only
TRACe[:DATA]:STIMulus[:ALL]? <Stimulus>
Returns the stimulus values of the active data trace or memory trace (see Table 7-16 ).
Note: To read the stimulus values of an arbitrary data or memory trace, use
CALCulate<Chn>:DATA:STIMulus?
Query parameters:
<Stimulus> CH1Data | CH2Data | CH3Data | CH4Data | CH1Mem |
CH2Mem | CH3Mem | CH4Mem | MDATa1 | MDATa2 | MDATa3 |
MDATa4 | MDATa5 | MDATa6 | MDATa7 | MDATa8
Stimulus data of the selected trace, see
Table 7-16 .
The data is transferred in the data format defined via
FORMat[:
DATA]
.
Example: SWE:POIN 20
Create a trace with 20 sweep points, making the created trace
the active trace of channel 1 (omitted optional mnemonic
SENSe1
).
TRAC:STIM? CH1DATA
Query the 20 stimulus values of the created trace. In the default
format setting, the data is returned as a comma-separated list of
10-digit ASCII values.
Usage: Query only
R&S ZVR/ZVABT compatible commands
www.allice.de Allice Messtechnik GmbH