Allice Messtechnik R&S ZND, User Manual, Page: 1082 / 1252

Command reference
R&S
®
ZND
1082 User Manual 1173.9557.02 ─ 61
Parameters:
<Boolean> ON
–
command sequence stored to file
C:\Users\Public\Documents\Rohde-Schwarz\Vna\
RemoteLog\VNARemote.log
.
OFF
–
command sequence not logged.
Example: SYST:LOGG:REM ON
Enable remote logging. The log file
'C:\Users\Public\Documents\Rohde-Schwarz\Vna\
RemoteLog\VNARemote.log'
is fixed and does not have to
be specified.
SYSTem:OPCHeck:PLEVel:PORT<Port>? <Power>[, <LimitLines>]
Defines and executes a power level operator check on port <Port> and returns its boo-
lean result.
Suffix:
<Port>
.
Physical VNA port no.
Query parameters:
<Power> Source power of port <Port>
Default unit: dBm
<LimitLines> String parameter specifying the name and directory of the limit
line file to be loaded.
The default extension (manual control) for limit line files is
*.limit
, although other extensions are allowed. If no path is
specified the analyzer searches the current directory, which can
be set/queried with
MMEMory:CDIRectory
.
If omitted, the firmware applies default limit lines (
±
dBm above/
below the specified source <Power>.
Return values:
<Result> 1 = PASSED, 0 = FAILED
Usage: Query only
Manual operation: See "Execute/Repeat" on page 562
SYSTem:OPCHeck:SELFtest?
Like the common SCPI command
*TST?
, this operator check performs a self test of
the R&S ZND and returns its result. However, the role of boolean results 0 and 1 is
exactly opposite.
Return values:
<Result> 1 = PASSED, 0 = FAILED
Usage: Query only
Manual operation: See "Execute/Repeat" on page 560
SCPI command reference
www.allice.de Allice Messtechnik GmbH