Alliant Networks CGW101, User Manual

Page: 62 / 83

Using the Web Configuration Interface M2M
62
by selecting one of the drop-down settings. For settings other than Open, enter a user name
and password.
When you are finished, click Change .
M2M
From the start page, click M2M . The M2M page appears, where you can configure network
and hardware settings for the Serial Passthrough feature.
Network settings
From the M2M page, click Network settings . The Serial Passthrough page appears, where
you can configure network settings for the serial passthrough feature.
When you are finished, click Change .
Setting Description
Supplicant mode Open : No authentication is performed.
Supplicant-MD5 : Authentication is performed as an IEEE 802.1X Supplicant,
using EAP-MD5 as the authenticating protocol.
User name
Specify the user name to use for authentication (
a string from 1 to 32
characters containing no spaces)
.
Password
Specify the password to use for authentication (
a string from 1 to 32
characters containing no spaces)
.