1. Place table face door on smooth even
surface.
* Ensure assembly surface is free of any
debri.
* Carton box top can be used to line floor
surface to reduce change of scratching
table.
ASSEMBLY INSTRUCTIONS
7SMGIAPTP01
GIAPTP018 / GIAPTP027
Pool Tables
3. Screw in table leg leveller base
* Do NOT over fasten or tighten. Adjustment
may be required to adjust table height and
levels.
4. Insert end leg panel between table legs,
and secure with bolt, washer and barrel
nut.
* Place barrel nuts into pre-cut holes in
end leg panel.
* With pre-drilled holes in both leg and end
panel aligned, thread bolt through
washer and leg panel.
* Secure bolt by threading and tightening
into barrel nut in endleg panel.
* Repeat for two (2) bolts per leg x all
four (4) legs.
PG1
PG2
2. Secure legs to table base.
* Note curved side facing outwards
* Each leg is secured by three (3) bolts
and washers and
*Repeat for all four (4) legs.
2
1
9
9
1
2
3
6
4
10
11
A
B
A
B
5. Place side leg panels in the inner part
of the legs
* Thread bolt with washer through both
leg panel and side panel from the
outside.
* Secure bolt by screwing on addtional
washer and locking nut from inner side.
* Repeat for two (2) bolts per leg x all
four (4) legs.
6
5
8
8
7
6
