37987
7
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
W003
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Section 3
Troubleshooting
IMPORTANT: Refer to appropriate wiring diagram for aid in testing washer components.
1. NO HOT WATER
2. NO COLD WATER
POSSIBLE CAUSE
TO CORRECT
Hot water supply faucet is closed.
Open faucet.
Water supply is cold.
Check water heater.
Kinked hot water inlet hose.
Straighten or replace hose.
Clogged mixing valve screen, or screen in outer end
of inlet hose nearest water supply faucet.
Disconnect hot water inlet hose, and clean or replace screen.
Inoperative hot water mixing valve solenoid.
Test solenoid and replace if inoperative.
Inoperative timer.
Test timer and replace if inoperative.
Inoperative temperature switch.
Test switch and replace if inoperative.
Inoperative pressure switch.
Test switch and replace if inoperative.
Clogged pressure hose.
Remove and clean or replace hose.
Broken, loose, or incorrect wiring.
Refer to appropriate wiring diagram.
POSSIBLE CAUSE
TO CORRECT
Cold water supply faucet is closed.
Open faucet.
Kinked cold water inlet hose.
Straighten or replace hose.
Clogged mixing valve screen, or screen in outer end
of inlet hose nearest water supply faucet.
Disconnect cold water inlet hose, and clean or replace
screen.
Inoperative cold water mixing valve solenoid.
Test solenoid and replace if inoperative.
Inoperative timer.
Test timer and replace if inoperative.
Inoperative temperature switch.
Test switch and replace if inoperative.
Inoperative pressure switch.
Test switch and replace if inoperative.
Clogged pressure hose.
Remove and clean or replace hose.
Broken, loose, or incorrect wiring.
Refer to appropriate wiring diagram.
