Alliance Laundry Systems PD3JGBGS403UG01, Programming

Page: 12 / 40

Special Features
Programming Control
The control allows the dryer owner to program the control with
the use of the keypad. Cycle and vend information may be pro-
grammed, audit information may be viewed and diagnostic tests
may be run by pressing keypad combinations.
For details on programming cycle and vend information, refer to
Programming Control .
Collecting Audit Information
The control will store audit information in its memory that can be
retrieved by pressing various keypad combinations. The control
will record coins entered, total machine cycles, top-offs, and total
start pulses.
For more information on the audit features, refer to Collecting
Audit Information .
NOTE: Additional audit information is retrievable with a
card reader. Refer to the appropriate instruction man-
ual.
NOTE: Additional audit information is retrievable with
an external device, a card reader or a network. Refer to
the appropriate instruction manual.
Testing Machine and Control Functions
Special programmable diagnostic features built into the control
allow the owner to run specific diagnostic tests. By opening and
closing the service door, with coin vault closed, and then pressing
various sequences of keypads, the owner may retrieve and per-
form the following tests:
• Control Software Version Number
• Input/Output Board Software Version Number
• Service Door Opening Test
• Coin Vault Opening Test
• Coin Drop #1 Input Test
• Coin Drop #2 Input Test
• Vend Header Present Status Test
• Start Pulse Test
• Dryer-on Temperature Test
• Door Switch Input Test
• Thermistor Temperature Test
• Machine Configuration #1 Display Test
• Machine Configuration #2 Display Test
• Machine Configuration #3 Display Test
• Machine Configuration #4 Display Test
• Machine Configuration #5 Display Test
For detailed information on running diagnostic tests, refer to
Testing Machine and Electronic Control Functions .
Rapid Advance Feature
This feature allows the user to quickly advance through an active
dryer cycle or advance into a cycle from the Ready Mode. This
feature is useful when tests must be performed immediately on a
dryer currently in an active cycle. In this case, the user can quick-
ly advance through the cycle to the Ready Mode. At this point,
the user can perform the required tests and then return the dryer
to the active cycle.
For detailed information on using the Rapid Advance feature, re-
fer to Rapid Advance Feature.
Start Pulse Operation
The control will accept pulses from optional payment systems.
The machine can be programmed to receive a single start pulse or
multiple start pulses, or the Start Pulse Option can be turned off.
The Start Pulse Mode allows the machine to go from the Ready
Mode to the Start Mode after a single or multiple pulses are re-
ceived.
Special Features
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
12 Part No. D515810ENR3