Dryer Operation
Power Up Mode
When power is applied to the dryer, the control becomes active.
This mode sets the next mode before enabling power failure de-
tection.
Ready Mode
In Ready Mode, the display shows the currently selected cycle,
the full vend price is displayed and the INSERT COINS/CARD
LED is lit (if enabled).
The user may select a different cycle, if desired. If the vend price
is not satisfied within 4.25 minutes, the dryer control will return
to the Ready Mode. The display will continue to show the re-
maining vend needed to start a cycle.
Additional Vend Mode
The control enters this mode if the cycle is changed to a cycle
that requires more money. The additional vend price will flash
one second on and one second off until a coin is entered, a start
pulse is entered or a vend payment is received. If the vend price
is not satisfied within 60 seconds or the door is opened, the con-
trol will go back to the first selection and the cycle will continue.
Start Mode
Vends may be satisfied by a coin drop, start pulses, or by a third
party card reader. If a coin drop is used, the remaining vend price
will decrease with each coin entry. If start pulses are used, the re-
maining vend price will decrease with each received pulse. Once
the vend is satisfied, the START LED will begin to flash and sig-
nal will sound for ten seconds. If a third party card reader is used,
the START LED will begin to flash when a valid cash card is en-
tered into the reader.
When the START keypad is pressed, the dryer will start. The
START LED will stop flashing and either the DRYING LED or
the COOL DOWN LED will be lit. The display will change to
show the remaining cycle time on the display. The DRYING
LED will be lit during the heat portion of a heat cycle. The
COOL DOWN LED will be lit during the cool down portion of a
heat cycle and during an entire no heat cycle.
When a cycle is complete, the display will show
00
until the door
is opened, a key is pressed, a coin or card is entered, or a start
pulse is received. When any of the above happens, the display
will revert back to the Ready Mode.
Entering Coins
Coins are entered to satisfy the programmed vend price for a se-
lected cycle. Coins may be entered before selecting a cycle or
during an active cycle. When coins are entered during an active
cycle, the time remaining is increased by the amount program-
med by the owner (refer to
The owner may choose to add additional time for each coin en-
tered. If coins are entered for an active cycle currently in the
COOL DOWN Mode, coins entered may push the cycle back into
the DRYING Mode. The maximum time for any cycle is 99 mi-
nutes.
Entering Cards
A card is entered to satisfy the programmed vend price for a se-
lected cycle. The card may be entered before selecting a cycle or
during an active cycle. When the card is entered during an active
cycle and the START keypad is pressed, the time remaining is in-
creased by the amount programmed by the owner. Refer to
The owner may choose to add additional time by deducting a
vend from the card or may require an additional full vend price
be deducted from the card. If vend is deducted during an active
heated cycle that is currently in the COOL DOWN Mode, the ad-
ditional time added may put the cycle back into the DRYING
Mode. The maximum time for any cycle is 99 minutes. Addition-
al time cannot be added if it exceeds the 99 minute limit on a dry-
ing cycle.
Dryer Operation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
11
Part No. D515810ENR3
Summary of Contents for PD3JGBGS403UG01
Page 2: ......
