39311
27
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Adjustments
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
W003
WARNING
19. Pressure Switch
NOTE: DO NOT ADJUST PRESSURE SWITCH
IF WASHER IS WITHIN THE WARRANTY
PERIOD.
Pressure switch is set at the factory for proper
water fill levels. However, if there is a problem
of overfilling or underfilling, pressure switch
can be adjusted.
Maximum water fill level can be increased by
turning adjusting screw CLOCKWISE, and
decreased by turning screw
COUNTERCLOCKWISE.
One quarter turn of the adjusting screw
represents approximately one inch (25.4 mm)
increase or decrease of water level in washtub.
IMPORTANT: DO NOT turn adjusting screw more
than 3/4 of a turn in either direction as the switch
may be damaged and flooding could result.
When testing, pressure switch has continuity
from terminal 1 to 2 when empty and 1 to 3
when full.
20. Belt (Agitate And Spin)
No belt adjustment is required.
Figure 2
W457SE1B
Adjusting
Screw
Summary of Contents for LWS01M series
Page 2: ......
