26
505033
Section 5 Service Procedures
Reversing Door Procedure (Commercial door not shown)
The door on this dryer is completely reversible. To reverse door proceed as follows:
Figure 10
D323S
D319S
D322S
D314S
D321S
A
B
D313S
D316S
B
A
D320S
D311S
7
8
9
1
2
3
4
5
6
Remove all nine screws.
Pull bottom of door liner out, then
pull down, removing door liner
from door panel.
Remove four hinge attaching
screws.
Remove door strike from door liner
and reinstall on opposite side.
Insert liner under flange on bottom
of door, then push top of door liner
into place.
Rotate door panel 180 degrees as
shown.
Using a screwdriver, remove two
door plugs, and reinstall on opposite
side of door opening.
Reinstall four hinge attaching
screws removed in Step 1.
Reinstall nine screws removed in
Step 2.