Safety Information
Important Safety Instructions
WARNING
Before operating a machine controlled by an elec-
tronic programmer, read this manual. Incorrect use
can result in serious injuries or damage to the ma-
chine controls. Ignoring instructions can cause an
incorrect machine function, which may result in inju-
ries or machine and/or linen damages.
C001
• Before installation, operating and maintenance of the ma-
chine, read complete instructions thoroughly which means the
following manuals: "Original Programming Manual" and
"Original Installation, maintenance and user's manual". Fol-
low these instructions and keep them handy for later use.
• A machine must be installed by following the "Original In-
stallation, maintenance and user's manual". Before the first
machine start, it must be initialized and tested by a qualified
worker.
• The electric service line must not be affected by other electri-
cal loading. A nominal voltage, if loaded or not must work in
the range ±10% with a maximum permanent frequency devia-
tion of 1% or a short-time one at 2% of a given frequency.
Connecting or starting the machine at an incorrect voltage can
damage the programmer.
• The machine must not be exposed to high humidity or ex-
treme high and low temperatures.
• Do not tamper with the controls.
•
Instructions in this manual do not cover all dangerous sit-
uations. It is up to the user to handle the machine careful-
ly.
• The manufacturer has the right to change specifications in this
manual without prior notice. All the stated information is only
for informative purpose and must be considered as general. It
is not possible to present all the specific data of the device.
NOTE: Every circuit board has a serial number and
board code. The model and serial number of the ma-
chine, must be mentioned in all correspondence or in-
quiries addressed to the distributor or manufacturer.
NOTE: The programmer uses machine type codes to
select different machines´ programmable machines ex-
ecutions. The model number on the machine doesn’t
indicate the machine type directly. It must be linked
with the description of the machine type letters.
Safety Information
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
8
Part No. D1631ENR7
Summary of Contents for IYG065J
Page 2: ......
