Alliance Laundry Systems FCIFF2000/500 ELECTRIC, Original Instructions Manual

Page: 9 / 15

• „5.6mt“ is ironing speed in m/min
Normal fold
Figure 4
FRENCH FOLD
In this mode the folder executes 3 folds: first, the linen is folded
in half; then, in thirds; and finally, in half again. The result is that
edges of the linen are hidden inside, refer to
Figure 5 .
The display will read, for example:
P 1 168/170 C back
S:36cm FS:3/10 5.6mt
• „FS:3/10“ is number of French cross folds/quantity of linen
in the stack
French fold
Figure 5
Stacker
The stacker automatically counts the quantity or pieces of linen in
the stack. After the set quantity is reached, it drives the stack of
linen out. If the height of the stack exceeds the maximum limit,
the linen is driven out before the set quantity of linen is reached.
Set quantity is displayed, for example:
P 1 168/170 C back
S:36cm NS:3/10 5.6mt
• „NS:3/10“ is number of normal cross folds/quantity of linen
in the stack (10 pieces)
Programming
Figure 6
In the programming mode, individual program parameters can be
set, programs can be copied, and languages can be set for display
messages. The programming mode can be activated by selecting
“2“ from the main menu after switching the machine on:
1: Start Ironing
2: Machine Settings
This mode is protected by a password " K " (refer to Figure 6 ).
The display will ask for the password:
Protected Menus.
Enter code:
To leave this selection, press. The " P " key.
Now, enter the password " 2262 " , and confirm with the " I " key.
The display will shortly read:
P R I M U S Factory
Settings
Followed by a question for a language change:
Change the active language (Y/N):
SETTING OF A LANGUAGE VERSION
Pressing the " I " key will cause the display to read:
Choose the desired language :
Choose from the offered languages by pressing " A " and " E ".
Confirm by pressing the " I " key. Then the display will read:
Language selected
System restart ...
If a selected language is not installed on your machine, the dis-
play will read:
This language is NOT available
Ask your supplier for the required language installation.
PROGRAMME EDITING
When pressing the " E " key after the previous "Change The Ac-
tive Language (Y/N):", the display will have a question:
Programming
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
9 Part No. D1607ENR1