Vend Control Instructions
NOTE: The control digit is the 7th digit in the model
number. Example: HCT020 [N] C1VXU400000
BCG, HCT and PCG Models with N and W Controls
Figure 58
1. Press the Hot, Warm, Cold, Blankets Cold, Delicate Warm or
Delicate Cold keypad to choose the desired cycle/tempera-
ture. The corresponding LED indicates the selection.
2. Press the Extra Wash and/or Exra Rinse keypads to add modi-
fiers to the cycle. The corresponding LEDs indicate the added
modifiers.
3. Insert coin(s) or card as necessary.
• If the machine is a coin operated unit, add coins. As each
coin is added, the vend counts down to the amount re-
maining.
• If the machine is a card operated unit, insert and remove
card per card system instructions.
• If the unit is interfaced to a central/remote pay system, go
to the central/remote pay console, make payment and se-
lect the machine and follow central/remote pay system in-
structions.
4. Add liquid and/or powder supplies to supply dispenser. Refer
to
a. Detergent:
• Liquid - Compartment 1 (prewash) + Compartment 3
• Powder - Compartment 1 (prewash) + Compartment 2
b. Bleach:
• Liquid - Compartment 3
• Powder - Compartment 2
c. Softener:
• Liquid - Compartment 4
5. Press the START (enter) keypad to select.
NOTE: Cycles can be changed anytime during the
first Fill Step. After the first Fill Step, all cycle key-
pad presses are ignored.
6. When a cycle is complete, the control displays
OPEN
DOOR
.
SCA, SCE, SCG, SCJ and SCU Models with N and
W Controls
Figure 59
1. Press the Normal 90C, Normal 60C, Normal 40C, Perminant
Press 60C, Delecates 30C or Delecates Cold keypad to select
the desired cycle/temperature. The corresponding LED indi-
cates the selection.
2. Press the A keypad to run the selected cycle with no modifi-
ers. Press the B and/or C keypads to add modifiers to the se-
lected cycle. The corresponding LEDs indicate the selected
modifiers.
3. Insert coin(s) or card as necessary.
• If the machine is a coin operated unit, add coins. As each
coin is added, the vend counts down to the amount re-
maining.
• If the machine is a card operated unit, insert and remove
card per card system instructions.
• If the unit is interfaced to a central/remote pay system, go
to the central/remote pay console, make payment and se-
lect the machine and follow central/remote pay system in-
structions.
4. Add liquid and/or powder supplies to supply dispenser. Refer
to
a. Detergent:
• Liquid - Compartment 1 (prewash) + Compartment 3
• Powder - Compartment 1 (prewash) + Compartment 2
b. Bleach:
• Liquid - Compartment 3
• Powder - Compartment 2
c. Softener:
• Liquid - Compartment 4
5. Press the START (enter) keypad to select.
NOTE: Cycles can be changed anytime during the
first Fill Step. After the first Fill Step, all cycle key-
pad presses are ignored.
6. When a cycle is complete, the control displays
OPEN
DOOR
.
Operation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
102
Part No. F8619501ENR11
Summary of Contents for BCA Series
Page 2: ......
